Contens / Warning; Components - BQS BVO FIX 0123 Manual De Uso

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

IMPORTANT
Please read the following instructions carefully before
installing the product.

1. CONTENS / WARNING

1. This child safety seat is suitable for
use as group 0+/1/2/3 from born to
approx. 12 years age/ 0-36kg.
2. Under no circumstances should the
safety seat be installed in the front seat
of the car opposite the direction of travel
if the car is equipped with an active
airbag.
3. Please read the car manufacturer's
handbook during the use of child
restraint system with ISOFIX.
4. Please
read
these
instructions
carefully, as incorrect installation
could result in serious injury. If
any injuries should occur as a
result
of
incorrect
installation,
the manufacturer will accept no
responsibility.
5. This child seat is in accordance with
the ECE R44/04 regulations and may
be installed in the majority of vehicles
equipped with approved points, such
as ISOFIX points, in accordance with
ECE regulation 16. However, prior
to purchase, the child seat should
always be tested in your vehicle with
the child seated, in order to ensure
that the model meets your needs.
6. Ensure that any lap strap is worn
low down, so that the pelvis is firmly
engaged, shall be stressed.
7. The seat cover should not be
replaced with any other than the one
recommended by the manufacturer,
because
the
cover
constitutes
an integral part of the restraint
performance.
8. If position of the adult safety-belt
buckle relative to the main load
bearing contact points on the restraint
is unsatisfactory. Please contact
24
the child restraint manufacturer if in
doubt about this point.
9. Not to use any load bearing contact
points other than those described in
the instructions and marked in the
child restraint.
10.Never use the child safety seat
without its cover and shoulder pads.
11.Protect the child safety seat from
direct sunlight, as the seat can get
very hot and harm the child.
12.Child seats or accessories that
are damaged or have been used
incorrectly must be replaced.
13.Do not leave heavy objects inside the
car, as these may injure the child in
the event of an accident.
14.Ensure that no part of the child seat
is caught in the door of the vehicle
or in a reclining seat. In addition,
ensure that the safety seat is correctly
installed and secured.
15.Do not disassemble, modify, or add
any piece to the child seat or harness,
as this would seriously affect its basic
functioning and the safety that the
child seat provides.
16.The safety seat must remain installed
in the vehicle. Even if the child is not
seated in the car seat. The child must
never be left unattended while seated
in the safety seat, not even outside
the vehicle.
17.Keep the safety seat away from
corrosive products.
18.The manufacturer guarantees the
quality of its products, but not the
quality of second-hand products
or
products
belonging to
other
companies.
19.Instruction
illustrations
are
informational purposes only. The
child restraint system may contain
small
differences
compared
the photographs or images in the
instruction manual

2. COMPONENTS

Headrest
Belt holder
Infant cushion
Harness
adjustment
button
Isofix insert guide
Harness
adjustment strap
Lock off decive
Upper belt
guide
Belt pass
slot
Lower belt
guide
Isofix release
button
for
to
Headrest
heigth adjuster
Shoulder pad
Shoulder strap
buckle
Buckle
Recline lever
Rotation
button
Yoke
Top tether
adjuster
Isofix connector
Connecting
plate
Top tether
anchoring hook
Isofix connector
25
Tabla de contenido
loading

Este manual también es adecuado para:

St-3

Tabla de contenido