Festo SLG-Z Serie Instrucciones De Utilizacion página 23

SLG-Z-...
Fitting pneumatic components
Connect the pneumatic tubing 1.
S
Fitting electric components
Using proximity switches:
Place the proximity switches in the groove
S
3 of the intermediate position module
(Fig. 19).
Fasten the proximity switches in the end
S
positions.
There must be a minimum distance L of
10 mm from ferromagnetic parts.
Fitting control components
Please note
The stop lever can destroy the shock absorber when it moves back.
S Make sure that the slide of the linear drive is outside the swivel range when
the stop lever moves in (e.g. by means of a control delay circuit).
The swivel-in speed of the stop lever exceeds the slide speed of the slide unit
type SLG-... .
Festo SLG-Z-... 0205NH English
Fig. 18
Fig. 19
Fe
10mm
Fig. 20
1
3
23