Steren TEMP-310 Manual De Instrucciones página 19

4. CONNECTIONS
To avoid the risk of electric shock, cut the power supply before making connections.
Normally open (NO): the device will remain off and will turn on at the scheduled time.
-CH 1: connect the line cord into the 1 screw and the power cord to the 2 screw.
-CH 2: connect the line cord into the 4 screw and the power cord to the 5 screw.
Channel 1 (CH 1) connection example:
-Loosen the ascrews and insert the power supply cables to the
corresponding inputs (L: line; N: neutral).
-To connect the devices that you want to control, there are two
options: normally open (NO) and normally closed (NC), depending
on the input to use.
7