Handling And Operation - UFESA BE0906 Manual De Instrucciones

Báscula digital
Ocultar thumbs Ver también para BE0906:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

Handling and operation

Before you use remove the isolation from
the battery. Please take note to the
polarity. If the scale does not operate after
you remove the insulation strip, take off the
battery and re-install it.
1
Insert one CR2032 battery into the scale.
2
Using the switch, select the appropriate
measurement unit (kg/lb/st) and place the scale on
a horizontal, stable surface.
3
Press the scale with your foot.
4
The value
5
Wait until this value disappears and the value
appears on the display.
6
Stand on the scale and wait until the result is
stabilized (two flashes).
7
The scale will automatically switch off after stepping
off or after 10 seconds of inactivity.
If a value other than
display after switching on the scale, wait
for about 10 seconds until the scale
automatically switches off and then switch it on
again.
If the display does not switch on or
shows the symbol
scale with the foot, the battery is low and
needs to be replaced.
If the symbol
display during measurement, it means
that the scale is overloaded.
will appear on the display.
appears on the
after pressing the
appears on the
Disposal
Dispose of packaging in an environmentally-friendly
manner. Our goods come in optimised packaging.
This basically consists in using non-contaminating
materials which should be handed over to the local
waste disposal service as secondary raw materials.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning
used electrical and electronic appliances
(waste electrical and electronic equipment
– WEEE). The guideline determines the framework for
the return and recycling of used appliances as applicable
throughout the EU. Please ask your specialist retailer
about current disposal facilities.
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his rights to modify the product any
time in order to adjust it to law regulations, norms, directives,
or due to construction, trade, aesthetic or other reasons, without
notifying in advance.
Tabla de contenido
loading

Tabla de contenido