Filters - domoova DRV80 Manual De Instrucciones

EN
Maintenance

Filters

To access the filters to clean them, lift up the cover on the top of the
tank.
1
3. Carefully shake the prefilter to remove any dust particles and
clean it with clean water. Let it completely dry before putting it
back in the dust bin.
1. The HEPA filter cannot be
cleaned, otherwise it would
become damaged. To extend
the filter's life, gently shake it
outside to remove any small
dust particles that could
accumulate.
filter is damaged, you are
recommended to replace it to
ensure that your robot's filter
performance is maintained.
2. The protection filter must be
3
cleaned with clean water to
remove all the accumulated
dust. Wait until it is fully dry
2
before putting it back.
20
If the HEPA