Operation - Blumfeldt 10030007 Manual De Instrucciones

You must ensure the water in the spa matches the water line printed on the spa
wall. Never dry-run the power pack as such type of operation will void the warranty.
Control panel
FILTER Key
When the FILTER PUMP has worked for 168 hours, the letters 'FC' will appear on
the display screen, accompanied by a warning tone. At that time, the indicator
lamp for the key of filtration system will be on but the filter pump will actually not
work. The indicator lamp for the key of heating system will be off and the heating
system will not work. Only by pressing the key 'FILTER' again can the indicator
lamp for the key of filtration system be off. At that time, the letters 'FC' on the
display screen will Figure j disappear and so will the warning tone. Actual water
temperature will be displayed. All keys return to normal working status.
'FC' and the warning tone are to remind the user to clean or replace the filter
element.
Jet Key
On-off key for the jet system. Press this key and the air pump will start working
and the red indicator lamp will be on. Press again and the jet system will stop
working and the lamp will be off. The jet system will stop automatically after
working for 20 minutes. If there is still need, you have to wait for 10 minutes and
then press the "Jet" key again.
During the time period which the bubbling function has been started and worked
for 15 minutes, bubbling can be stopped or started. During the time period that the

Operation

26