Signateur SCKDF-10 Manual De Instrucciones página 6

4
Use the gas orifice tool to remove the LP orifice from
each main burner valve, through the hole on the
firebox front panel.
Note: All orifices of the grill are double orifices (LP
gas and natural gas). You only remove the LP gas
orifice tip.
6
Carefully replace each burner, making sure burner
openings slide over valve nozzles and burner holes
are facing up. Re-attach burner hitch pin and cotton
pin. Re-attach any electrodes that we detached in
step 3A. Replace flame tamer,cooking grates and
warming rack.
Note: Follow directions in the leak testing section of
this manual before using this grill.
6
5
Make sure all control knobs are OFF, then remove all
main and smoker control knobs.
Tighten screw on each control valve as shown.
Replace control knobs when finished.
Note: This screw regulates the low flame setting for
natural gas. After replacing knobs you will notice the
knobs will stop at the " MEDIUM" setting on the
dial. This is the correct low setting for natural gas. Do
not try to turn the knob to " LOW" setting.
7
SMOKER BURNER
Remove screw from the burner support bracket and
remove the smoker burner. Set aside for later use.