Conversion Instruction - Signateur SCKDF-10 Manual De Instrucciones

WARNING
SOME PARTS MAY CONTAIN ROUGH EDGES. WEAR PROTECTIVE GLOVES IF NECESSARY DURING ASSEMBLY.
The following tools are required to assemble the Conversion Kit (not included):
• Phillips and Flathead Screwdrivers
1
Note: Make sure all control knobs are in the off
position, LP tank valve is closed and tank is
disconnected from regulator and removed from grill.
Using an adjustable wrench to hold the gas manifold
connection secure, use a 3/4" wrench to loosen
the hose connection nut. Replace existing LP
hose/ regulator assembly with natural gas 10' hose
assembly. Tighten the connection carefully using two
wrenches.
3A
Remove electrode from any burner by unscrewing
bolt that marked in circle. Set aside for later use.

CONVERSION INSTRUCTION

• Adjustable Wrench
2
Open the hood and remove warming rack, cooking
grates and flame tamer. Set aside for later use.
3B
Remove hitch pin and cotton pin from each burner
"foot". Carefully lift each burner up and away from
valve openings. Set aside for later use.
• 3/4 Wrench
5