DUCASSE INDUSTRIAL SEGMENTA TWIN TL Instructivo De Montaje página 18

step 2
- Plumb track 1 (R1) to determine the high GPR guide position.
- Drill the floor with a 6mm diameter drill bit to set the guide in place, just at the end
of the fixed panel (PF), as shown in the diagram.
R1
For Toledo doors, change the idler
on both guides to use the 11.5mm
For this, it is necessary to remove the
Seagers lock and change the idler.
18
Set-up of the guide to the floor
PF
diameter one.
PF
PF
11.5 8.5