Chauvet DJ EVE E-50Z Guia De Instalacion página 5

Gobo
The EVE E-50Z includes 2 types of gobo holders, glass and steel.
• Gobo Size: D (53.3 mm outside, 43 mm image, 2 mm max thickness)
DMX Linking
The EVE E-50Z can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX or DIP-switch configuration, download the DMX Primer
from www.chauvetdj.com.
Starting Address
To ensure full access to the two channels available in DMX mode, the highest recommended DMX address is 510.
Master/Slave Connection
The EVE E-50Z uses the DMX data connection for its Master/Slave mode. Instructions for connecting and configuring this
product for Master/Slave operation are in the User Manual.
D-FI USB Connectivity
The EVE E-50Z is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi USB from CHAUVET DJ.
Simply set the DIP switch D-Fi receiving/transmitting channel, plug it into the USB port then set the product's DMX
Personality and DMX Address. Further instructions for D-Fi USB operation for this product are in the User Manual.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display
control/menu buttons will be unavailable until you unplug the D-Fi USB. The priority levels are:
1. D-Fi USB
2. Wired DMX
3. Manual Digital Display / Menu Buttons
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may
cause damage to the product.
DMX Values
3-CH
CHANNEL FUNCTION
1 Dimmer
2 Strobe
Dimmer speed
3
mode
1-CH
CHANNEL FUNCTION
1 Dimmer
EVE E-50Z QRG Rev. 5
QUICK REFERENCE GUIDE
VALUE
000 255

000 010

011 255

000 051

052 101

102 152

153 203

204 255

VALUE
000 255

PERCENT/SETTING
0-100%
No function
Strobe (slow to fast)
Dimmer speed set from display
Dimmer speed mode Off
Dimmer speed mode 1 - fast
Dimmer speed mode 2 - medium
Dimmer speed mode 3 - slow
PERCENT/SETTING
0-100%
EN
4