IOGear Share Pro Guía De Configuración Rápide página 5

4
Hardware Installation
4
Receiver
4
5
STEP 5
Use one of the USB charging cables to connect to the micro USB port of the
transmitter to a type USB-A port on the source device to obtain power. In a rare
case that the source device has no USB port, please use a 5V USB power
adapter with a minimum of 500mA output
STEP 6
The power LED (blue) will come on solid and a message will be displayed on
your TV/projector stating it is waiting for connection. After approximately 30
seconds the wireless LED (red) on both the transmitter and the receiver will start
to blink once every second. The transmitter wireless LED will become solid and
the receiver red wireless LED will continue to blink every second, the connection
is now established.
STEP 7
Video from your source device will now be duplicated on your TV/projector.
NOTE: We recommend to use this device for line-of-sight use only as it is
designed as a short range device.