Repair Parts - Brizo Pascal 64900 Serie Manual De Usuario

Changing the Mode for the Indicator Light:
This faucet has five individual modes that can be set by the user. The modes are:
Mode 1 - (Default) - Blue to indicate Hands Free active; red to indicate low battery.
Mode 2 - (Hands Free Flash) - Flashing blue when Hands Free is active; solid blue when water is
running due to Hands Free activation; magenta when water is flowing due to touch activation.
Mode 3 - (All LED's Off) - All LED functions (with the exception of Low Battery) are disabled.
Mode 4 - (Diagnostic Mode) -
IR mode: Solid Blue Light
Spout touch: Flashing Magenta
Valve touch: Solid Magenta
Valve on/off activation: Flashing Red
Pull down activation: Solid Red
Mode 5 - (Showroom Mode) - Blue LED turns on solid whenever water is flowing.
To Change the Light Modes:
1. Locate the mode button on the box (See page 2).
2. Close the manual valve.
3. Depress the mode button until the light turns magenta (approximately 2 seconds), then release.
4. When light extinguishes push the mode button the corresponding number of times for the
desired mode.
5. After several seconds the LED will blink the number of times the button was pushed.
To change light indicator modes, perform the following steps:
1. Move manual valve handle to closed position.
2. Within 10 seconds, push in and hold the mode button until the LED light turns magenta.
3. Release the mode button.
4. When the magenta light extinguishes, push the mode button the number of times that
corresponds to the desired mode. (e.g. 3 times for mode 3)
5. After a few seconds the LED will repeat the number of times the button was pushed.
6. Open the valve handle to try the new mode.

Repair Parts

RP47768s
Knob
RP42881
Pump
RP47769
Base & Gasket
RP21945
Nut
RP21904
Bottle
RP30395
Vented Funnel
RP48053s
Body Assembly
(includes base,
shank, gasket & nut)
sSpecify Finish
17
RP47767s
Soap Dispenser
Assembly