Tabla de contenido
Idiomas disponibles
Idiomas disponibles
does not fit fully in the outlet, reverse the plug.
If it still doesn't fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature. If this unit shuts itself off, first press the
reset button on the ALCI plug. If it still does not
run, the thermal protectors that are built into
this dryer may have operated. If the unit still
does not run after being allowed to cool, return
the unit for servicing.
ALCI SHOCK PROTECTION
This Andis hair dryer has been manufactured
with an appliance leakage circuit interrupter
(ALCI) (Figure A) This mechanism will shut the
dryer off (making it inoperable) under abnormal
conditions, such as falling or being immersed in
water. The ALCI shock protection is equipped
with a test and a reset button.
TEST BEFORE EACH USE
1. Plug the ALCI Shock Protection Plug into a
110-120 volt electrical outlet (ordinary
household current). Do not attempt to use
any other electrical outlet.
2. Before attempting to switch the dryer on,
perform the following test: Press the test
button, the reset button should pop up. This
confirms that the safety plug is working
properly.
3. Now press the reset button and your dryer will be operable and the power
switch of your dryer may be turned on for normal use.
4. If the dryer does not operate in the properly, it should be either returned to
an Andis Authorized Service Station for examination, or discarded.
VOLTAGE SELECTION
Be sure dryer is OFF before attempting to change voltage selection. To set
the required voltage, slide the voltage selector switch (on the side of the
dryer) to the appropriate voltage marking (Figure B). For use in the U.S.A., the
voltage selector switch should be placed in the 125 volt position. For use in
several countries overseas, the voltage selector switch may need to be placed
in the 250 volt position. Confirm the voltage available at each overseas
location before using the dryer.
4
A
RESET
TEST
B
Voltage
125
250
Selector
Switch
C
Cool
Shot
Button
HIGH
On/Off and
MED
AIr/Heat
LOW
Settings
OFF
D
Slide Off
Slide On
When operating at 250 volts, the unit will only work with the switch in
position LOW. This setting will provide high heat and high blower speed.
Do not try to operate with the switch in position HIGH when operating at
250 volts. For connection to a 250 volt supply, use an attachment plug
adapter of the proper configuration for the power supply receptacle.
AIR/HEAT SETTINGS
At the 125 volt position, there are 3 air/heat settings: LOW, MEDIUM, and
HIGH (Figure C). Note the MEDIUM and HIGH settings have the same air flow
speed, however the HIGH uses a higher temperature setting for faster drying.
At the 250 volt position, only the LOW setting is available.
COOL SHOT
This dryer is equipped with a cool shot button (Figure C). To deliver the cool
shot of air, press the button on front side of handle. The cool shot is ideal for
locking in curl for longer lasting style. Just concentrate cool air on desired curl
until set.
USING ATTACHMENTS
This dryer comes with an attachment brush, a wide-tooth and a fine-tooth
attachment comb. To use an attachment, simply slide on and slide off of dryer
(Figure D).
CERAMIC TECHNOLOGY
This dryer uses ceramic technology to provide healthier hair compared to
standard dryers. Ceramic technology also helps keep the heat even and
consistent, to reduce drying times and minimize stress and damage to the hair.
USER MAINTENANCE
This appliance does not require special maintenance, cleaning or lubrication.
Service only through Andis authorized service stations. To find an Andis
Authorized Service Station near you log on to www.andis.com or contact our
customer service department: 1-800-558-9441 (U.S.) or 1-800-335-4093 (Canada).
Untwist cord before use. After use, re-wrap cord and store unit in a safe place.
Do not wrap cord tightly around dryer. Do not hang dryer by the power cord.
CLEANING
Unplug dryer before cleaning. Clean external surfaces of dryer with sponge or
soft rag moistened with a mild soap and water solution. Do not use harsh
cleaners, detergents, or solvents. Dry the dryer thoroughly before use. You can
also clean the screen with a vacuum cleaner.
5
Tabla de contenido
