Fitting the wall bracket
The wall bracket (Fig.1, Pos.1) and the spacer angle (Fig.1, Pos.6) are included with the sauna heater.
With due consideration of the minimum distances, screw the wall bracket to the sauna wall using
the four 5x35 wood screws supplied (see Fig. 3b).
Caution: A board must be fitted behind the panels to provide support at the points where the screws
are screwed into the sauna wall; this is to ensure that the screws are firmly seated. Alternatively the
board can also be attached in front of the panels.
To mount the spacer angle, unscrew the screw from the floor plate and screw fasten the spacer
angle at this position (see Fig. 3a).
Insert the sauna heater in the wall bracket in such a manner that the spring tabs of the wall bracket
engage in the openings of the rear panel and tangibly click in place.
Fig.3a
Wall bracket
Spacer angle
21