Power Supply Assembly - Detnov DET-FAD-905 Manual Del Usuario

Place the power supply to an approximate height of 1.5 m and a handy location, where
the light indicators on the power supply are easy to visualize.
Ensure that once installed, the power supply can be opened without being obstructed
by any obstacle. Remember that the weight of the batteries is significant.
GB
1. Keep the rear chassis in correct position against the wall and mark the position of
the fixation holes and make sure the chassis is leveled.
2. Do not use the rear chassis as a guide to do the drills, this could cause irreparable
damage to the equipment.
3. Drill holes in the wall, and prepare the required holes for the wires. Screw the chassis
to the wall using the holes in the box and correct screws.

2.3 Power supply assembly.

6