Important - HP FS7600 Guia Del Usuario

COLOR selection
The white of the image can be adjusted.
1 Use the – + button to select: (1) 9300°K,
(2) 6500°K or (3) User color.
2 If the (3):the user's color is selected,
"2" appears in the lower right of the
On-Screen Menu.
Press the /select button to display the
USER COLOR adjustment screen.
User Color
The white of the video image can be adjusted to
the user's preferred color.
1 Use the /select button to select R (red),
G (green) or B (blue).
2 Use the – + button to adjust the color as
desired.
Memory recall of the user's color

IMPORTANT:

is not possible, so take note of the initial setting
before adjusting.
When the monitor is turned OFF, user color
keeps the last adjustment.
8
User's Guide
LANGUAGE selection
The language of the On-Screen Menu can be
selected among English, French, German,
Italian, Spanish, and Simplified Chinese. Select
with the – + buttons.
DISP. FREQ (Input frequency display)
This displays the input synchronization signal
frequency.
It identifies the horizontal and vertical frequency
sent to the monitor from the video card currently
in use.
Manual Degaussing
After moving the selector to the degauss icon,
press the /select button. The degaussing
action takes place a few seconds later.
A sharp snap noise may be heard when
NOTE:
degaussing occurs. This is normal.