Charging Times; Technical Specifications - HI-Q TOOLS PM750 Manual De Instrucciones

Step 8: Maintenance
Continuously monitors the battery to determine when a
maintenance charge should be initiated. If the battery
voltage falls below its target threshold, the charger will
restart the Maintenance cycle until voltage reaches its
optimal state and then discontinues the charge cycle.
The cycle between Optimization and Maintenance is re-
peated indefinitely to keep the battery at full charge. The
battery charger can be safely left connected indefinitely
without the risk of overcharging.

CHARGING TIMES

The estimated time to charge a battery is shown below.
The size of the battery (Ah) and its depth of discharge
(DOD) greatly affect its charging time. The charge time
is based on an average depth of discharge to a fully
charged battery and is for reference purposes only. Ac-
tual data may differ due to battery conditions. The time
to charge a normally discharged battery is based on a
50% DOD.
Battery Size Approx. Time to Charge In Hours
Ah
8
12
18
24
30
6V 12V
5.0 5.0
8.0 8.0
12.0 12.0
16.0 16.0
20.0 20.0

TECHNICAL SPECIFICATIONS

Input Voltage AC: 100-240, 50-60Hz
Working Voltage AC: 100-240, 50-60Hz
Efficiency: Approx. 85%
Power: 13W Max
Charging Voltage: 6V & 12V
Charging Current:
Low-Voltage Detection: 2V (12V), 2V (6V)
Back Current Drain: <5mA
Ambient Temperature: 0°C to +40°C
Charger Type: 8 Step, Smart Charger
Type of Batteries: 6V & 12
Battery Chemistries:
Battery Capacity:
Housing Protection: IP60
Cooling: Natural Convection
Dimensions (L x W x H):
Weight: Approx. 222 g
750mA (12V),
750mA (6V)
Wet, Gel, MF, CA, EFB,
AGM.
2-30Ah (12V), 2-30Ah
(6V), Maintains All Battery
Sizes
Approx. 11.3 x 6.8 x
3.9 cm
23