Tabla de contenido
Quick Setup
1.
For optimal coverage, place the light at 15 feet from the distance you are trying to
illuminate. This will provide coverage for an area 80' (24.4 m) wide by 50' (15.2 m) high.
2.
Grasp the stake to insert Holiday Party Plus into the ground. Alternatively, if using
Holiday Party Plus on a flat surface, unscrew the thumbscrew to remove the stake, and
attach the stand in its place.
3.
Connect the power cord into a standard wall socket or extension cord rated for outdoor
use. Unplug when not in use.
4.
Turn the thumbscrew to loosen, angle the fixture either up or down, and tighten the
thumbscrew at the desired projection angle/area. If the lights are spilling onto a
neighboring house or structure, try placing the light closer to the object you want to
illuminate.
5.
Press and release the Power button on the top of Holiday Party Plus to power on. Press
and hold the Power button for 2 seconds to power off.
Note: In the event the remote control is lost, the Power button allows for cycling through the
light modes by quickly pressing and releasing the Power button. However, individual color
selection must be performed with the remote control.
Note: The darker the area the light is being used in, the brighter the projection. Try to stay
away from areas with street lights and other bright lights.
5
Tabla de contenido
