Quick Setup - ION Holiday Party Guia De Inicio Rapido

Quick Setup

1. For optimal coverage, place the light at 15 feet from the distance you are trying to
illuminate. This will provide coverage for an area 80' (24.4 m) wide by 50' (15.2 m) high.
2.
Grasp the stake to insert Holiday Party into the ground.
3. Connect the power cord into a standard wall socket or extension cord rated for outdoor
use. Unplug when not in use.
4. Turn the thumbscrew to loosen, angle the fixture either up or down, and tighten the
thumbscrew at the desired projection angle/area. If the lights are spilling onto a
neighboring house or structure, try placing the light closer to the object you want to
illuminate.
5. Press and release the Power button on the top of Holiday Party to power on. Press and
hold the Power button for 2 seconds to power off.
Note: In the event the remote control is lost, the Power button allows for cycling through the
light modes 1 – 4 by quickly pressing and releasing the Power button. However, individual
color selection must be performed with the remote.
Note: The darker the area the light is being used in, the brighter the projection. Try to stay
away from areas with street lights and other bright lights.
5