ECCOTEMP L5 Manual De Uso Y Cuidad página 10

Eccotemp Systems LLC | Email: [email protected] | Address: 315 - A Industrial RD Summerville, SC 29483
Adjustment
The temperature of the outgoing water is dependent on the temperature of the incoming water
balanced with the amount of heat applied. Use extreme caution in setting the outlet water
temperature.
1. With the water regulator set to high, and the gas regulator set to low, feel
the outgoing water. This is the lowest setting available.
2. To initially raise the outgoing temperature, slowly turn the gas valve
towards maximum. Adjust slowly and check the temperature often. There
will be a slight delay between increasing the gas supply and the increase in
water temperature.
3. Should the outlet water temperature need to be higher, slowly reduce the
water flow regulator until desired temperature is reached.
(Warning: Do not alter or change this water heater's original temperature sensor)
WARNING:
HEATER IS CAPABLE OF PRODUCING SCALDING
WATER TEMPERATURES!
PLEASE NOTE: THIS MODEL IS NOT RECOMMENDED NOR HAS IT BEEN TESTED FOR ANY PERMANENT INSTALLATIONS. THIS MODEL IS PART OF OUR
PORTABLE SERIES AND NEEDS TO BE TAKEN DOWN AND STORED IN A WARM DRY PLACE AFTER EVERY USE.
8
THE PORTABLE TANKLESS WATER
THIS MANUAL AND ALL ECCOTEMP CONTENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator