Channel Number Setting; How To Check And Deal With Interference; Order Of Actions (Action Flowchart) - Toa WT-4810 Instrucciones De Operación

7. CHANNEL NUMBER SETTING

Turn the Channel Select switch to select the same channel number as that of the wireless microphone. A total
of 16 different channel numbers are made available for selection from 0 – 9 and A – F.

8. HOW TO CHECK AND DEAL WITH INTERFERENCE

8.1. Order of Actions (Action Flowchart)

Pressing RF check key, check signal
condition of the channel.
Change to idle channel.
Pressing RF check key, check signal
condition of the channel.
Adjust squelch to limit transmission distance.
Contact shop from where equipment was
purchased.
6
Front panel
[No]
Any
interference?
[Yes]
[No]
Any
interference?
[Yes]
[No]
Any
interference?
[Yes]
CHANNEL
4 5
2 3
6
1 7
0 8
F 9
E A
D B
C
Channel select switch
See p. 7 "8.2. Checking Ambient Signal
Condition."
Use as is.
See p. 6 "7. CHANNEL NUMBER SETTING."
Use as is.
See p. 7 "8.3. Reducing Radio Interference
by the Squelch Control."
Use as is.