Installing Batteries - Laney MINISTACK Manual De Instrucciones

MINISTACK & MINISTACK-B

INSTALLING BATTERIES

MINISTACK & MINISTACK-B can be battery powered should this be desired
and require 6xAA Batteries. Batteries, If used incorrectly may leak or
explode and cause damage or injury, please take the following precautions.
1) Carefully follow the
installation instructions
pictured opposite for
fitting new batteries,
especially the polarity
2) Avoid mixing new batteries
with old or part used
batteries
3) Avoid mixing battery types
4) Do not try to recharge or
take apart alkaline batteries
5) Remove the batteries from
the unit if it is not going to
be used for a long time.
6) If batteries have leaked in
the battery tray, remove
the batteries and all traces
of the discharge in the tray.
Use caution so that none
of the discharge gets near
the skin or the eyes. Any
affected area should be
immediately rinsed with cold
running water, seek medical
advice.
7) Do not dispose of used batteries in fire or water systems. Batteries
must not be exposed to excessive heat such as sunlight, fire or the
like. Used batteries should always be disposed of in compliance
with the current regulations applicable to the country/region
where you live.
9
Fitting batteries
USER MANUAL
www.laney.co.uk