Neumann MINIMISSION Guia De Instalacion página 10

10
EN
2.2
A feature, such as flowers or shrubs that are close
to the mowing boundary, should be part of the
boundary as shown in the picture.
2.3
If there is an island that sits inside your lawn where
you don't want Minimission
path as shown in the picture to peg your wire.
The wire should run from the perimeter to outline
the defined island and then return back to the
perimeter. The boundary wire between the island
and perimeter should be laid close together
and held in place by the same wire peg. During
operation, the Minimission
pass over this part of the wire.
2.4
In the case of two islands that are close to each
other, it would be convenient to lay out the wire as
illustrated in the picture.
The Minimission can travel freely over the boundary
®
wire between the islands and the mowing boundary.
to go, please follow the
®
will be able to freely
®