Tabla de contenido
3.0 Operations
3.1 Power Up
Open the front panel (banknote stacker). Connect the 12V adapter to a
power outlet and to the jack at the rear of the machine; the unit will conduct
a self-check by spinning the rollers several times. The counting number and
batch number displays will both show "0" when the unit is ready.
Note: Refer to section 5.0 for any self-test codes. Be sure to unplug the
machine when not in use.
3.2 Counting mode
The default mode of the machine is counting mode. All banknotes placed in
the hopper will be counted automatically. If banknotes begin to fly out of the
machine during the counting, press the "restart" button to stop the counting.
Then, press the "restart" button to begin counting again.
3.3 Batch Function
Batches can be set by pressing the "+50," "+10" and "+1" keys. Any combi-
nation can be used to set the required batch. The preset batch is displayed on
the right side. The actual count will be displayed on the left side. In order to
remove and clear the preset batch, press, "restart" key.
16
Tabla de contenido
