Installation Procedure - Cash Acme TANK HEATGUARD BOOSTER 020 Serie Manual Del Usuario

Installation Procedure

Before connecting the tee-piece and mixing valve to the water
heater, it is important to consider the alignment required to
enable connection of the tee-piece to the mixing valve with the
flexible hose, and the positioning of the mixing valve to allow
easy access for adjustment. The position of the recirculation
port also needs to be considered.
1.
Apply sealing tape to the hot and cold connections on the
water heater. Connect the non-grooved end of the union
fitting to the hot outlet of the water heater. Place a strainer
HOT OUTLET
TANK BOOSTER
Installation Instructions/ Directives d'Installation/ Instrucciones de Instalación
IS279 REV K
11-12-12
seal (bulge
towards heater)
the union fitting then
screw the nut onto the
mixing valve in the
orientation shown.
side
on