Operating The Remote Control - degardo LUNOCS Flame Instrucciones De Uso Y Montaje

OPERATING THE REMOTE CONTROL

RGB remote control (Figure F)
Button
POWER ON/OFF
F1
(On/off)
Main switch
F2
Touch wheel
F3
Brightness
Speed
F4
Program selection
POWER ON/OFF
F5
(On/off)
Zone controller
Colour sequence programs
Press the "M" button to select a colour sequence program. You can select the appropriate program
(programs 1 – 9) by clicking repeatedly on this button. Press and hold the POWER ON button (F1 or
F5) for unchanging white light.
No. Colour sequence program
1 Smooth-flowing colour changes: yellow-green-blue-purple-red
2 Pulsating white light
3 Red-green-blue-white: pulsating colour changes
4 Changing colours: red-green-blue-yellow-purple-turquoise-white
5 Flashing colour change: green-blue-white
6 Pulsating red, then three flashes of red
7 Pulsating green, then three flashes of green
8 Pulsating blue, then three flashes of blue
9 Combination of pulsating and flashing colour changes (programs 1 – 8)
Remote control for the warm-white LED (Figure G)
Button
POWER ON
G1
(On/off)
Main switch
Rotary wheel
G2
Brightness
POWER ON
G3 (On/off)
Zone controller
14
Function
This is the on/off switch for all zones. The most recent selected colour or colour sequence
program remains saved even when the lamp is switched off.
The touch wheels are used for setting and selecting the colours. When the touch wheel is
touched, the current program is interrupted and the corresponding colour is displayed.
This adjusts the brightness of both the static and the colour sequence programs.
This adjusts the speed of the colour sequence program:
S-/S+ buttons
Select one of the programs for the colour sequences (1 – 9): M button
Individual zones and lamps can be selected using this zone controller function. A long
press of the POWER ON button (F5) starts the lamp with the white light.
Function
This is the on/off switch for all zones. The most recent settings remain saved even when
the lamp is switched off.
Using the rotary wheel, you can adjust for 11 back-light brightness sequences. To make a
global adjustment (if you are controlling multiple lamps), press the POWER ON button (G1).
To set the brightness for individual zones, first press the desired POWER ON button for the
zone control (G3) and then adjust the brightness of the respective zone.
This selects and assigns zones to the lights. Press the POWER ON button (G1) to select
all zones.
www.degardo.de LUNOCS