Maintenance; Blade Cleaning - Fanimation The Avaston FP6210 Serie Manual Del Propietário

How to Operate Your Ceiling Fan
To make fan operational ,install two 3-volt batteries
2.
into the hand-held remote transmitter, (if not using for
long periods of time, remove battery to prevent
damage to transmitter). Store the remote away from
excessive heat or humidly (Figure 27).
The 5-button hand-held remote transmitter includes
3.
five buttons for high, medium and low fan speeds
as well as fan off and light on/off. Infinite light levels
are available by holding the light on/off button
(Figure 28).
4. If airflow is desired in the opposite direction, turn
the fan off and wait for the blades to stop turning.
Then slide the reverse switch to the opposite position
and turn fan on again. The operating sequence is as
follows: (Figure 29)
Reverse Switch Information
Season Rotation Direction
Summer Counter-Clockwise
Winter Clockwise
1. Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.When cleaning, use
only a soft brush or lint free cloth to avoid scratching
the finish. Abrasive cleaning agents are not required
and should be avoided to prevent damage to finish.
Periodic light dusting of the blades is recommended.
A feather duster will work best.
Switch Position
Left
Right

Maintenance

Blade Cleaning

Avoid using water, cleansers, or harsh rags, which
can warp and ruin the finish.
13
(continued)
3V, CR2032
BATTERY
(2 PCS)
REMOTE
CONTROL
Figure 27
5-BUTTON
REMOTE
CONTROL
Figure 28
Reversing
Switch
Figure 29
CAUTION
Do not use water when cleaning your ceiling fan.
It could damage the motor or the finish and create
the possibility of electrical shock.