Spelsberg BCS Pure Manual De Instrucciones página 10

Ocultar thumbs Ver también para BCS Pure:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Under the cover, there are LEDs that display the status of the respective charging point.
LED
Off
Green
Green/flashing
Red
Operation
Warning
Risk of burns from overheated rechargeable battery
During charging, the rechargeable battery of your LEV heats up
Make sure that the maximum temperature of the rechargeable battery is not exceeded (see
manual of the rechargeable battery manufacturer).
Attention
Risk of damage
The charging station and the rechargeable battery can be damaged by incorrect operation.
Compare the voltage output on the rating plate of the rechargeable battery with the
respective power supply on the charging station.
Never pull the plug out of the socket on the connecting cable.
Ensure that the cable cannot be loaded by pressing or pulling.
Connecting the rechargeable battery directly
Attention
Risk of damage from electric shock
The is a risk of a short-circuit caused by moisture or if the cable and plug are damaged.
Before use, make sure that the supply line, plug and connection socket is clean and dry.
Never use the plugs and switches if you have wet hands or your feet are standing in water.
Fig. 2: Connecting the system plug, e.g. Bosch, Shimano or others, depending on the equipment
Connect the respective cable to the LEV rechargeable battery (Figure 2).
9
The LED on the charging station flashes green.
9
As soon as the charging process has finished, the LED at the charging point illuminates green constantly.
Disconnect the cable from the LEV rechargeable battery.
Wind up the cable three to four times and hang the plug in the holder.
10
Status
Charging point off
Charging point ready or charging process finished
Charging process running
Fault at charging point
Tabla de contenido
loading

Este manual también es adecuado para:

Bcs smart

Tabla de contenido