Connecting Busbars - Lenze E94AZPP04 Serie Instrucciones Para El Montaje

5 Electrical installation
Wiring

Connecting busbars

5.3.2 Connecting busbars
Fig. 5−4 Example: Connecting busbars
Proceed as follows to connect the busbars:
1. If devices of the interconnected system have already been in operation:
–
If necessary, switch off the supply system and wait until the discharge
time has elapsed (depending on the device, this may take up to 30
minutes).
–
Make sure that all power terminals are deenergised.
2. Loosen the busbar screws (do not remove them completely).
58
l
SSP94PN201
EDK94ZPP0364 DE/EN/FR/ES/IT 3.0