TRANSPORT AND STORAGE
TRANSPORT
Based on the characteristics of the cells, a proper transport environment for the lithium LiFePO4 batteries is required in order to protect them.
The battery must be in a dry, indoor, ventilated and clean storage warehouse and between -20ºC - 35ºC.
The battery should be stored in 45~55% SOC during transportation.
The battery can be handled in a truck, boat or other type of transport. When transported, it must always be cover from the sun and be handled with
care during its charge and discharge. Throwing, rolling or pushing the battery as mechanical, rain or snow impacts should always be avoided.
STORAGE
The storage of the battery must be in an indoor, clean and dry warehouse.
Harmful gases or flammable materials, corrosive chemicals and explosive products are not allowed near the batteries.
As it avoid mechanical impacts, pressure and hard magnetic field effects, keep the battery away from the sunlight and any source of heat at a
2m distance at least. The battery box should at least be 15cm high above the ground. If the battery is going to be stored for longer periods than 3
months, it must be charged at least once and if the storage is for longer than 12 months periods, the battery must be checked out connecting it to a
system in order to test its correct performance.
1
Storage Temperature
2
Storage humidity
INSTALLATION
LOCATION
Required:
There must be no flammable or explosive materials nearby.
The recommended ambient temperature should be within the range of -10 ~45°C.
The battery must be installed on walls that are upright and can support the battery weight.
The batteries must be installed indoor
Recommended:
The building should be designed to withstand earthquakes.
The battery should be installed on waterproof and properly ventilated area.
Install the battery on a flat wall, surface or heavy-duty cabinet.
Use proper supports, brackets and/or straps to handle the weight of the battery.
Install this batter out of the reach of children and animals.
CAUTION!
If the ambient temperature is outside of the operating range, the batteries may stop operating to protect the internal
components. The optimal temperature range for the batteries to operate is from 10°C to 30°C. Frequent exposure to harsh
temperatures may deteriorate the performance and overall life of the battery and will void the warranty.
INSTALLATION SPACE
For a proper ventilation, an adequate installation space, cabling and air flow are required. The minimum distance for the installation is
as follow:
www.intipv.com
Less than 1 month
-20~35 C
Less than 6 months
-10~30 C
45~75%RH
B-
B+
RS485
MANUAL DE USUARIO BATERÍA DE PINO / BATTERY PINO USER MANUAL
15cm
19