Rr-3000 Nozzle; Accessories; Maintenance Instructions; Engine Access - RIDGID KJ-3000 Manual Del Operador

KJ-3000 Water Jetter Machine
2. Make sure the pulse actuator is in the OFF position
and start the jetter as described above.
3. The black nozzle end has two adjustment. By rotating
the nozzle, the wash pattern can be wide or narrow.
The nozzle also has a FORWARD (low pressure)
and BACK (high pressure) position. Make sure the
nozzle is in the BACK (high pressure) position to
begin operation.
4. Adjust system pressure with the wash wand acti-
vated. Once pressure is achieved, begin washing
and adjust the nozzle setting as required.
To Use the Detergent Injector
Do not spray flammable liquids or toxic
WARNING
chemicals.
1. Attach the siphon hose to the adjustable detergent in-
jector manifold and place the strainer end into the
detergent's container.
2. The nozzle must be in the FORWARD (low pres-
sure) position. Activate wash wand to apply chemical
or detergent.
3. The detergent injector is adjustable. To increase si-
phon rate, rotate brass sleeve on chemical injector
counter-clockwise.
NOTE! Detergents are only dispensed when wash wand
nozzle is in the low pressure position.
4. After detergent application is complete, pull the nozzle
back to achieve full pressure and continue normal
pressure washing.
To Use the RR3000 Nozzle
Use the extension to stabilize the RR3000 when clean-
ing 8" diameter lines (Figure 9)
Failure to use extension may result in
WARNING
the RR3000 turning and exiting the drain causing serious
injury.
Extension
Figure 9 – RR3000 Nozzle with Extension
10

Accessories

WARNING
been designed to function with the Water Jetting Machine.
Other accessories suitable for use with other tools may be-
come hazardous when used on the machines. To prevent
serious injury, use only the recommended accessories.
Jetter Nozzles and Hoses
Catalog Model
No. No.
64802 H-81
64807 H-82
64812 H-84
82847 H-85
64817 H-91
64822 H-92
82857 H-95
16713 RR3000 Root Ranger Nozzle
47592 H-1425
47597 H-1435
47602 H-1450
49272 H-1475
49277 H-1400
64732 H-1415
64827 H-3835
64832 H-3850
64837 H-3810
64842 H-3815
64847 H-3820
64852 H-3825
64857 H-3830
Jetter Accessories
Catalog Model
No. No.
62882 H-5
64862 H-38
64902 H-38 WH
64797 HW-30
48367 H-25
48157 FV-1
66732 HF-4
47542 H-21
67187 H-32

Maintenance Instructions

Disconnect spark plug wire before making any re-
pairs.

Engine Access

In order to access gas cap and air filter, disconnect the
hose reel latch and rotate the hose reel forward until it
rests on the front cross bar (Figure 3).
Ridge Tool Company
Only the following RIDGID products have
Description
" NPT
Propulsion Nozzle 1 /
8
" Hose
Penetrating Nozzle Fits 1 /
4
Drop Head Nozzle
" NPT Spin Nozzle
1 /
8
" NPT
Propulsion Nozzle 1 /
4
" Hose
Penetrating Nozzle Fits 3 /
8
" NPT Spin Nozzle
1 / 4
" x 25' Trap Hose
1 /
4
" x 35' Trap Hose " Trap Hose
1 / 1 /
4 4
" x 50' Trap Hose
1 / Orange
4
" x 75' Trap Hose
1 /
4
" x 100' Trap Hose
1 /
4
" x 150' Trap Hose
1 /
4
" ID x 35' Wash Hose
3 /
8
" ID x 50' Jet/Wash Hose
3 /
8
" ID x 100' Jet Hose " Jet Hose
3 / 3 /
8 8
" ID x 150' Jet Hose
3 / Black
8
" ID x 200' Jet Hose
3 /
8
" ID x 250' Jet Hose
3 /
8
" ID x 300' Jet Hose
3 /
8
Description
Mini Hose Reel
Hose Reel (Fits KJ-3000)
" ID Hose (Fits KJ-3000)
Hose Reel with 200' x 3 /
8
Wash Wand, KJ-3000
Winterizing Kit
Foot Valve
Quick Connect Hose (Reel to Foot Valve)
Nozzle Cleaning Tool
Jet Vac
WARNING
Hose Hose
I.D. O.D.
" "
3 / 1 /
16 4
" "
3 / 1 /
16 4
" "
3 / 1 /
16 4
" "
3 / 1 /
16 4
" "
3 / 1 /
16 4
" "
3 / 1 /
16 4
" "
3 / 5 /
8 8
" "
3 / 5 /
8 8
" "
3 / 5 /
8 8
" "
3 / 5 /
8 8
" "
3 / 5 /
8 8
" "
3 / 5 /
8 8
" "
3 / 5 /
8 8