Hotpoint Ariston MCA 16/HA Instrucciones De Uso página 5

! All protective parts must be attached so that they
cannot be removed without the aid of a tool.
Next replace the protection and the drip tray.
Electrical connection
! Coffee machines with three-pole power cable are
regulated for alternating current, with voltage and
frequency shown on the rating plate attached to the
appliance.
! The installer is responsible for checking the correct
connection of components and observing safety
regulations.
Before connecting make sure that:
• the socket is earthed and is compliant with statutory
regulations:
• the socket is able to withstand the maximum power
load of the machine, shown on the rating plate;
• the supply voltage is within the values shown on the
rating plate;
• the socket is compatible with the appliance's plug.
Otherwise replace the plug or the socket; do not use
extension leads or adaptors.
! Once the appliance is installed, the electric cable and
socket must be easy to reach.
! The power cable must not be subject to coiling or
compression.
! The cable must be checked regularly and replaced
only by authorised technicians.
! The company accepts no responsibility for non-
compliance with these regulations.
Installing the power cable
such that no section of it is above room temperature
by more than 50°C/122°F.
• Put the plug in the
tray socket on the rear
of the machine
• Connect the power
cable to the mains
• Put the plug in the
power socket.
The position of the
power cable must be
Rating plate
• Nominal voltage
See plate on the appliance
• Power rating
See plate on the appliance
• Power supply
See plate on the appliance
• Shell material
Metal
• Dimensions (w x h x d)
595 x 460 x 320(mm)
Faceplate - 23.43" x 18.11" x 0.79"
Body - 21.26" x 18.11" x 11.89"
• Weight
23 kg / 51 lbs
• Cable length
1200 mm / 47¼"
• Control panel
Piezoelectric
• Water tank
Removable
• Water tank
1.75 liters / 59.17 fluid onces
• Coffee bean hopper capacity
300 g / 10 onces coffee beans
• Pump pressure
15 bars / 1500 KPa
• Boiler
2 - Stainless Steel - Aluminium
• Safety devices
Boiler pressure safety valve
Safety thermostat
Subject to engineering and manufacturing changes
due to technological developments.
The machine conforms to the European Directive
89/336/EEC (Italian Legislative Decree 476 dated
04/12/92) concerning electromagnetic compatibility.
NA
5