Hotpoint Ariston MCA 16/HA Instrucciones De Uso página 16

Programming
Programmable functions
NA
STANDBY
When the appliance is used very little, it is possible
to select the STANDBY mode. This function reduces
energy costs. Nevertheless, it is recommended to
switch off the appliance at the mains if it is to be out of
service for long periods. The machine reheats in just a
few minutes when reactivated.
Select the function by pressing the
STANDBY
RINSING
and enable with the
STANDBY
The machine is on but none of its components is active.
To activate the machine press
RINSING
Immediately after heating, the appliance automatically
eliminates any water left in the internal ducts to ensure
that only fresh water is used to make coffee.
The function has been enabled by the manufacturer.
To disable the function, press the
function:
RINSING
LANGUAGE
and enable it with the
RINSING
ON
Now, with the
RINSING
OFF
and save the choice using the
16
key
*
key. The display shows:
.
key, select this
*
key. The display shows:
key select
key.
LANGUAGE
This setting allows you to choose the machine
operating language. Moreover, it allows you to
adjust the parameters of the beverages to the typical
parameters of the country where the machine is used.
This is why some languages are differentiated also by
country. The machine is generally programmed with the
language of the country where it will be sold.
To change the language, use the
this function:
LANGUAGE
CONTRAST
and enable it with the key.
The display shows:
LANGUAGE
ENGLISH
Select the required language by pressing the
key and use the key to save your choice.
CONTRAST
Regulates display contrast for better viewing.
Use the key to select this function:
CONTRAST
WATER HARDNESS
Enable it with the key.
The display shows:
CONTRAST
>¢¢¢¢¢
Now select the required contrast by pressing the
key and use the key to save your choice.
key to choose
*
*
< 50