Hochiki CHQ-WS2 Instrucciones De Instalación página 2

GB WALL SOUNDER & WALL SOUNDER
BEACON INSTALLATION INSTRUCTIONS
PRODUCTS COVERED: CHQ-WS2, CHQ-
WS2(WHT) Wall Sounders, CHQ-WSB2/WL,
CHQ-WSB2/RL, CHQ-WSB2(WHT)/RL,
CHQ-WSB2(WHT)/WL Wall Sounder
Beacons
COMPATIBLE BASES:
YBN-R/3(WHT)-SCI, YBO-R/3(RED), YBO-
R/3(WHT), YBO-R/SCI(RED)
INTRODUCTION
The CHQ-WS2 is a loop-powered addressable
wall sounder. The CHQ-WSB2 is a loop-
powered addressable wall sounder beacon.
Both units are compatible with the standard red
mounting base (YBO-R/3(RED)) and the red
isolator base (YBO-R/SCI(RED)); the units
have connections for both these types of base.
Do not attempt to use any other base type with
these units. Both sounders and bases are also
available in WHITE (YBO-R/3(WHT) (see
above).
Both the CHQ-WS2 and CHQ-WSB2 are
Ingress Protection rated to IP21C for internal
use, but can be made weatherproof when used
in conjunction with the CHQ-WPK Weather
Proofing Kit, in which case they are Ingress
Protection rated to IP65*
in accordance with the CHQ-WPK instructions
(2-3-0-627).
1
* This product has only been approved to
IP33C by LPCB
www.acornfiresecurity.com
1
but only when used
www.acornfiresecurity.com
ADDRESS SETTING (WITH HAND HELD
PROGRAMMER)
The units will need to be manually addressed
between 1 and 127. The sounder address can
be set using the hand-held programmer (TCH-
B200) as the units both include the appropriate
terminals to fit directly onto the Programmer.
See the TCH-B200 instructions for further
details of address setting. The address must
be set before installation.
TONES AND VOLUMES
Table 1 below shows the full range of sound
outputs available from the CHQ-WS2 and
CHQ-WSB2 together with the amount of
current drawn when operated. The units are
also capable of utilising different EN54-3
Approved tones; these are listed in Table 2.
The tone of the sounder and the volume level
is selected and controlled by the control panel,
therefore check
manufacturer for options and default values
available. The sounder and beacon elements
of the CHQ-WSB2
independently, check with the control panel
manufacturer for compatibility.
with the control
can be controlled
panel