Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PARTS DETAIL
A. Cover: The cover consists of a front foam section and a back clip section. The top
has a three section Velcro
and the sides are 100% polyester knit spacer fabric. The back and the section divider
are 100% polyurethane coated nylon knitted fabric.
B. Foam Pad: Provides additional support to the user's pelvis & trunk. Made of
polyurethane foam.
C. Back Clip: Chrome plated steel clip. A handle near the top aids in removal of the
Retroback from the wheelchair.
D. Snaps: Holds back clip in place.
E. Operations Manual: Instructions on Retroback attachment, care and other
important information.
F. Product Registration Card: Complete product registration card and mail to
ROHO, Inc. or register online at www.therohogroup.com.
Sizing Table
Item Numbers
Retroback Cover & Foam Pad
Size (Width x Height x Depth)
RETRO16C
(33.0 cm x 35.5 cm x 4.0 cm)
RETRO18C
(38.0 cm x 35.5 cm x 4.0 cm)
RETRO20C
(43.0 cm x 35.5 cm x 4.0 cm)
* All measurements taken are from outside of back post to outside of back post.
The average weight of an assembled Retroback is 3 lbs. (1.4 kg).
enclosure. The front material is 100% water resistant nylon
®
13 in. x 14 in. x 1.5 in.
15 in. x 14 in. x 1.5 in.
17 in. x 14 in. x 1.5 in
A.
B.
C.
D.
Fits Wheelchair
Widths*
min.
max.
15 in.
16 in.
(38.0 cm)
(40.5 cm)
17 in.
18 in.
(43.0 cm)
(45.5 cm)
19 in.
20 in.
(48.5 cm)
(51.0 cm)
2
E.
F.
Product
Registration Card
Fits Wheelchair
Heights
min.
max.
16 in.
18 in.
(40.5 cm)
(45.5 cm)
16 in.
18 in.
(40.5 cm)
(45.5 cm)
16 in.
18 in.
(40.5 cm)
(45.5 cm)
Tabla de contenido
