Important Fundamental Information - meibes Basic Pro Manual De Instrucciones

These instructions describe installation, commissioning, operation, repair
and disassembly of the differential temperature controller Basic Pro
for solar thermal plants.
For operation of the entire plant, the technical documentation of all the
components used such as solar collectors, boiler, tank, pumps, mixers
and valves etc. must be complied with.
Danger!
Assembly, connection, commissioning, repair and disassembly of
the controller may only be performed by a qualified specialist!
The controller is handled by the operator of the entire solar
thermal plant, i. e. as a rule by technical non-experts.
Danger!
The controller by no means replaces the safety
components required under plant engineering aspects!
Make sure not to use the controller until you have thoroughly read and
understood these Assembly and Operating Instructions and the safety provisions.
Comply with all safety provisions and involve a specialist in case of doubt.
Important!
The fitter installing the controller must inform the plant operator about
operation, functioning and the method of action of the Basic Pro!
Keep these Assembly and Operating Instructions and all reference
documents so that they are available if required.
When relocating or when selling the device, hand the documents over to your successor.
Danger!
The device in operation may only be made accessible to
adults disposing of appropriate knowledge and experience!

Important fundamental information

5