Alcad 905-PC Guía Rápida De Programación página 2

QUICK PROGRAMMING GUIDE 905-PC
Start/on
Main menu
Select series Transcodifi cador 912 QPSK - COFDM
NIT Table
Select series
905-PC Channel processor
905-RG Regenerator DVB-T/H
905-PC Channel processor
Confi gure module
Set the programming switch of the 905-PC module to the ON position. The programming
Mode
Analog
Analog
Digital
Program by
Channel
Channel
Frequency
Channel table
BG CCIR
Input
Channel
2
Frequency
57.50
Off set
0
Bandwidth
8
Output
Channel
2
Frequency
57.50
Off set
0
14
Attenuation
Set the programming switch of the 905-PC module to the OFF position. The programming
OK
OK
OK
indicator will now light up and remain lit.
OK+
OK+
OK+
Keypad + T
o
OK+
MHz Keypad + T
MHz Keypad + T
Keypad + T
o
MHz
OK+
Keypad + T
o
OK+
MHz Keypad + T
MHz OK+
Keypad + T
o
dB
OK+
indicator light will now go out.
Press the Power On key of the PS-011 to start up the
system.
Choose Select Series to select the programming series.
Select the series: 905-PC Channel Processor.
To commence programming the module, select Confi gure
module.
Select the operating mode. Then press T to transmit.
+OK+T
Select the programming mode of the output of the
+OK
module: channel or frequency.
+OK Select the standard for the output channel.
Enter the input channel either by using the numeric
keypad or by selecting a channel from the pulldown
+OK+T
list. Then press T to transmit.
Use the numeric keypad to enter the frequency of the
input channel. Then press T to transmit.
Select the offset of the input channel from the pulldown
list. Then press T to transmit.
Set the bandwidth of the output channel to 7 or 8
MHz. Then press T to transmit.
+OK+T
Enter the output channel either by using the numeric
keypad or by selecting a channel from the pulldown
+OK+T
list. Then press T to transmit.
Use the numeric keypad to enter the frequency of the
output channel. Then press T to transmit.
Select the offset of the output channel from the pulldown
+OK+T
list. Then press T to transmit.
Enter the attenuation in the output of the module using the
numeric keypad. Then press T to transmit.
+OK+T
ENG