How To Broadcast A General Warning; How To Avoid Being Bothered By A Warning; How To Survey A Room; How To Finalise Surveillance - Tez audio TMH10 Manual Del Usuario

How to broadcast a general warning

Emeter (TMH40):
• The control can be switched on or off.
• Keep the key
• The associated LED will be lit up while we broadcast the message.
• When we finish broadcasting, release key
will be switched off.
Receiver:
• The control unit can be switched on or off.
• The message will be broadcasted in our room, as long as we do not have the DO NOT
DISTURB function activated (see next section).

How to avoid being bothered by a warning

Receiver(TMH30-TMH40):
• The control unit can be switched on or off.
• Press key
The LED associated with said key is lit up permanently, and the DO NOT DISTURB
function remains activated.
• To deactivate the DO NOT DISTURB function, press key

How to survey a room

Emeter (TMH40):
asting
• The control unit can be switched on or off.
• Press key
• The LED associated with said key is lit up permanently.
• If the control was switched on, the music will stop.
s.
• We now have the control unit prepared for surveillance.
Receiver(TMH30-TMH40):
• The control unit can be switched on or off.
• Keep the key
• Any sound picked up by the surveillance control unit will be reproduced by the speakers
in our room.
• We can adjust the listening level with the increase and decrease volume keys.
How to fi nalise surveillance
Emeter (TMH40):
• Press key
• The LED associated with said key will be switched off.
• Surveillance will be cancelled.
Receiver(TMH30-TMH40):
• Press key
• The LED associated with said key will be switched off.
• Reception is cut off.
pressed while we talk to the microphone integrated in the control.
.
.
pressed until the LED associated with said key flashes.
.
.
and the LED associated with the key
again.
User Manual
keep pressed
short pressing
short pressing
long pressing
short pressing
short pressing
27