How To Listen To The Hi-Fi Speakers Connected To The Control Unit; How To Listen To An External Music Source On The Entire Installation; How To Connect A Music Source To The Control Unit - Tez audio TMH10 Manual Del Usuario

How to connect a music source to the control unit

We can connect music sources to our control unit in two ways:
• From behind, a hi-fi system with its speakers can be connected
in order to control these from the control unit. (Check with insta-
ller to carry out this connection).
• From the front, we can connect a music source using the
TEZ T014 connection. Said connection includes RCA connectors
in one of its ends for the control unit and any of the following
options:
• 3.5 Jack connector for the output of earphones of small players.
• 6.5 Jack connector for the output of HI-FI headphones.
• RCA connectors for the output of a deck audio line of HI-Fi' s .
How to listen to the hi-fi speakers connected to the control unit
• Press key (local function).
• The LED associated to said key will be lit up.
• The supply input will supply 220 V to the music source connected
to the same.
• The hi-fi speakers will be activated.
• If you press the key again the 'local' function will be deac-
tivated.

How to listen to an external music source on the entire installation

• Press the key ('remote' function).
• The LED associated to said key will be lit up.
• The supply input will supply 220 V to the music source connected
to the same.
• The music source connected to the control unit will be heard in
the entire installation.
User Manual
Line Output
Earphones
MP3
(only tc25)
21