Pairing | First Smartphone; Pairing | Up To 8 Smartphones; Connecting - Marmitek BOOMBOOM 93 Modo De Empleo

4.3.1 Pairing | First smartphone

1. Please check that the BoomBoom 93 is switched on.
2. Hold your (Bluetooth-enabled) smartphone near the
BoomBoom 93 (< 1m).
3. A blue LED on the front of the BoomBoom 93 will flash.
4. Activate Bluetooth on your audio source and then go to its
Bluetooth settings.
5. Then scan for new devices and select the name
"BoomBoom 93".
6. If the Bluetooth pairing request asks for a password, enter
"0000". The BoomBoom 93 will then pair with your
smartphone and the blue LED will light up. Pairing was
successful and your smartphone is now connected to the
BoomBoom 93. You can now play and control audio from
your smartphone on your audio system.
NOTE: Up to 2 (Bluetooth-enabled) smartphones may be
connected to the BoomBoom 93 simultaneously, and you can pair
up to 8 smartphones.

4.3.2 Pairing | Up to 8 smartphones

When you want to pair multiple smartphones (max. 8), you must
first disconnect the Bluetooth connection of the already connected
smartphone(s). Then, follow the steps at 4.4.1 Multipair Party
mode. When all the desired smartphones are paired, you can re-
activate the Bluetooth connection on all audio sources.

4.4 Connecting

The BoomBoom 93 does not always automatically connect to the
last smartphone it was paired with, this depends on the Bluetooth
audio source that is used. To connect, go to the Bluetooth settings
on your audio source and select "BoomBoom 93". A connection
will be established; the blue LED is lit continuously. As long as no
connection is established, the blue LED will flash slowly.
10 © MARMITEK