Software Installation - Ovislink EVO-W54ARv2 Guía Rápida De Instalación

Rear Panel:
The rear panel contains the following features. (Viewed from left to right:)
1. R-SMA connector to screw the supplied 5dBi antenna.
2. WAN RJ45 port for connecting the router to a Cable or DSL modem (Ethernet
models)
2. Four LAN 10/100Mbps RJ45 ports for connecting the router to the local
computers.
3. AC power socket: only use the power adapter supplied with the
Evo-W54ARv2 Router, use of a different adapter may result in product
damage.
4. Factory Default Reset button
How to Reset to factory default settings :
1. Turn on the access point power.
2. Press and hold the Reset button for 10 seconds.
3. Release the Reset button and wait for the router to reboot.
Before the software configuration:
1. Screw the antenna to the R-SMA connector.
2. Use the supplied Ethernet cable to connect your computer to the router.
3. Plug the Power supply to the Power socket and plug the other side to the
electrical socket (wall or UPS).
4. Wait until the LED M1 flashes. Now, you can access to the website of the
router.

SOFTWARE INSTALLATION:

Access to the web page:
1. Please, open your web-browser and enter the
following address :
http://192.168.1.1 and press Enter.
2. To access to the web page, you've a login
window that appears. Please, enter
the default username and password :
User: admin
2
Password: admin