Care And Maintenance; Filter Replacement - SheerAIRE AC-2064 Guía De Uso Y Cuidado

CARE & MAINTENANCE

FILTER REPLACEMENT

WARNING: To avoid serious injury from electrical shock, ALWAYS turn the
Air Purifier OFF and unplug BEFORE performing filter replacement procedure.
NOTE: The Change Filter Indicator Lights will illuminate when it is time to
replace the HEPA Filter or Pre-Filter. Under conditions of normal use (12 hours
a day), this will occur approximately every 3 months for the Pre-Filter and once
a year for the HEPA filter. The filters may need to be changed more often with
continuous operation or use in smoky, dusty environments or harsh air quality
environments. See Filter Replacement Table.
FILTER REPLACEMENT
Rear Cover
Pre-Filter
Pre-Filter
Locking Tabs
HEPA Filter
Fan Housing
Chamber
1. Turn the Air Purifier OFF and unplug from outlet.
2. Place the unit on a hard flat surface with the rear cover facing up.
To remove cover, gently pull rear cover tab towards you.
3. Remove all plastic packaging from new filters.
Remove filters indicated for replacement.
4. With a dry soft cloth, wipe visible dust from exposed fan housing
chamber.
5. Install a new HEPA filter with its Pre-Filter Locking Tabs facing up
as shown.
6. Install a new Pre-Filter by securing it onto the Pre-Filter Locking Tabs.
NOTE: Do not try to wash and reuse either a HEPA Filter or Pre-Filter.
7. To reinstall rear cover, insert tabs into slots of the unit. Rotate
cover downward and gently press down until cover snaps securely
in place.
6
Rear Cover Tab