Introduction
Instructions for fixing TV stand
1. Remove the the Rear Board from the Rear Cabinet of the TV by removing the screw.
2. Put the Rear Board on the Stand Neck, and fix the rear board with the screws supplied (4 x B4 x 16).
The Rear
Board
1
The Stand Neck
3. Put the Rear Board on the Rear cabinet of TV, and fix the rear board with the screws supplied
(8x2836/M4x12, 2xB4x16).
5. Remote Control
Installing Batteries
1. Open the battery compartment cover on the back of the remote control.
2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery
compartment. Don't mix di
3. Close the cover.
Batteries shall not be exposed to excessive heat such as direct sunlight or fire.
- The remote control should be operated within 30 feet (7m) and 30
IR receiver at the front of the TV.
- Used batteries should be disposed of properly.
S
e t
p
1
Battery
Compartment
Cover
1
Remove the Screw
2
Remove the Rear Board
Front View
Screws: 2xB4x16
1
fferent types or used batteries with new ones.
S
e t
p
2 x AAA Battery
The Rear
Cabinet
The Rear Board
Back View
2
Screws: 2xB4x16
2
2xB4x16
2
Note: the pictures below are
only for reference
3
8x2836/M4x12
0
to the left and right of the
S
e t
p
3
9