Installation - U-Line U-Chill UCC1A Guia De Instalacion

5.0 Installation

5.1 Cut Hole
5.2 Cut Vent
(if necessary)
5.3 Insert Washer
(if necessary)
5.4 Align & Lower U-Chill
For hole cutting - see section 3.2
For vented installations - see section 4.2
For washer installation - see section 3.4
TM Carefully lift the U-Chill from the box using
TM
two hands
Align logo to desired position
Lower slowly into hole
Push down evenly on top of the crown until
flush with the countertop, clearing any
protective film
5.5 Thread Clamp
5.6 Power On & Enjoy!
Twist the clamp onto the U-Chill until it is
TM
fastened tightly against the underside of the
countertop, making sure not to twist the logo
out of alignment.
Below countertop
Plug the U-Chill into the supplied 12
TM
power adapter
Once the product detects power, it will turn on
automatically
The U-Chill TM will automatically go into standby
after 4 hours without use
To turn on during standby, simply touch
the crown
V