Troubleshooting - Chicco NaturalFeeling Manual De Instrucciones

• Sterilise before use.
• Ensure no residual liquid remains in the teat after washing or sterilisation.
• Store in a cool, dry place.
• The pigmentation of some foods (eg, tomato sauce) and bright coloured drinks (eg, tea, fruit juices) can alter
the colour of the product.
Sterilisation
• The bottle must be opened and disassembled before steam sterilising or by sterilising them by boiling.
• The product can be sterilised using cold sterilisation solutions, steam sterilised using suitable equipment or
sterilised by boiling for 5 minutes, preventing contact with the metal walls of the receptacle.
• UV sterilisers are not recommended.
Assembly
• Make sure that the product is assembled correctly before use to ensure proper bottle operation and prevent
any leaks.
Warming the bottle
• To warm the content, we recommend using the special bottle warmers after removing the cap.
• Take extra care when microwave heating:
- Remove the ring and the teat before placing the bottle in the oven: explosion hazard.
- If you use a combination microwave oven, ensure that the grill is off.
- Always stir the heated food to ensure even heat distribution and test the temperature before serving to prevent
scalding the baby.
• Do not heat the product in traditional ovens or on hot plates or open flames.
• Plastic baby bottles:
Can be placed in the freezer. Remove the teat and use the apposite cap for storage. The First Angled Well-Being
Feeding Bottle, is not suitable for freezer.
• Pour the milk in the container taking care not to exceed the maximum capacity indicated on the graduated
scale; tighten the airtight cap and store the container in the fridge or in the freezer.
• The milk can be stored for 48 hours in the fridge and for 3 months in the freezer. We recommend storing the
milk in the fridge or in the freezer immediately after expression.
• Do not refreeze thawed breast milk.
• Do not add fresh breast milk to frozen breast milk.
• Remove the cap and/or the non-spill cup from the container when heating the milk or any other food and/or
beverage. Do not leave the container in a hot water bath or in the bottle heater with the water boiling.
• You can heat the container in a microwave by removing the teat, ring, cup, and cap.

TROUBLESHOOTING

Problem Cause
Valve or diaphragm not assembled or
The breast pump is badly assembled
not pumping or is not
pumping enough
The breast does not fit in the pump body
Painful expression The suction mode is too high
Solution
Ensure that the valve and the diaphragm are
assembled correctly
Position the breast pump better for the breast to
fit properly and ensure that the nipple is centred.
Try with/without the soft silicone cushion
The suction mode depends on how you press
the handle and on the speed of the movements
of the grip.
Change the speed and the way you hold down
the handle to find greater comfort during stimula-
tion and expression.
10