Timer Operation; Battery Installation - Weber PERFORMER DELUXE Guia Del Propietario

TIMER OPERATION

This water-resistant digital cook timer provides both countup and countdown features in
hours, minutes, and seconds.
To set the time to countdown:
• Press the Start / Stop:
Press the HR button (1) to set the number of hours. Hold the button down to fast
•
forward digits (maximum setting: 99 hours) (4).
Press the MIN button (2) to set the number of minutes. Hold the button down to fast
•
forward digits (maximum setting: 59 minutes) (5).
When the time is set, press the Start / Stop:
•
countdown.
• When the time is up, the alarm will sound for 30 seconds and automatically restart
countdown from previous time setting.
When the timer has over an hour left on the countdown, H and M (Hours
and Minutes) will flash on and off; numbers will countdown every minute.
When the timer has less than an hour of time left, H and M turn to M and S
(Minutes and Seconds) and the seconds countdown; numbers will start to
countdown every second.
To clear the time:
Press the Start / Stop:
•
• Press the HR and MIN: buttons simultaneously (1)(2).
To set the time to countup:
Press the Start / Stop:
•
• Press the Start / Stop:
display will show the reading in hour/minute and minute/second formats.
Press the Start / Stop:
•
after 99 hours (4), 59 minutes (5).
Automatic shut off:
• To save battery life, the backlight turns off after 10 seconds. The timer will turn
completely off after 10 minutes of inactivity.
Note: If using the timer in an environment that subjects it to electrostatic discharge (static
electricity) the time setting may be lost. If this happens, reset the timer.

Battery installation:

• Use a Phillips screwdriver to unlock the battery compartment on the back of the
timer (6) by turning the screw clockwise.
• Remove the battery cover from the back of the timer (7).
Add or replace the AAA batteries (8).
•
• Replace the battery cover.
• Lock the battery cover by turning the screw counterclockwise with a Phillips
screwdriver.
• After the batteries are installed, (
Maintenance:
• Do not clean the timer with an abrasive or corrosive compound. Doing so may
scratch it or corrode the electronic circuits.
• Do not subject the timer to excessive force, shock, dust, or expose it to excessive
temperatures or humidity. Doing so may result in it malfunctioning, shorter
electronic life span, battery damage, or distorted parts.
• Do not tamper with the internal components of the timer. Doing so will invalidate
the timer's warranty and may cause unnecessary damage to the battery and
internal parts.
• Do not subject the timer to excessive exposure to direct sunlight or heavy rain.
• Do not immerse the timer in water.
For best performance, it is recommended to bring the timer
indoors while not in use.
22
button to turn on the backlight.
button (3) to start the
IMPORTANT
button to turn on the backlight.
button to turn on the backlight.
button again to start countup. While counting up,
button twice to stop timer. The countup will stop
00
00) will display on the LCD screen.
OPERATING
4
5
1
7
2
3
6
8