Reer 46760 Manual De Instrucciones página 14

Lower Put the wall hinge (c) on the connecting bar (b) before this is screwed together with the lower hinge, fig. 17.
wall bracket Always mount the wall hinge from below, fig. 18 and 19.
Insert the wall bracket (e) with the flat side on the back of the wall hinge until it clicks into place, fig. 20.
Mark the position of the wall bracket on the wall, fig. 21.
Remove the wall bracket (e) from the wall hinge again. To do so press the small button on the top of the wall
bracket, push the wall bracket downwards, Abb. 22.
Put the wall bracket (e) on the position marked on the wall, draw in drill holes, fig. 23.
Secure the wall bracket (e) to the wall using the accompanying wooden screw (i), fig. 24. (use suitable screws,
4mm, and wall plugs on other mounting surfaces)
Wall click system Hook the wall hinge (c) in the wall bracket (e). CAUTION: ensure that the wall hinge is correctly locked into the
Click in wall bracket, fig. 25.
Click out Unhook the wall hinge (c) from the wall mount (e): push the small button and lift the railing at the same time,
fig. 26.
right side / Repeat stage 2 on the right side.
hinge side Parts used for this:
Upper hinge cap (h), wall hinge (d)
Step 3
Using the accompanying Allen key (k), tighten all inserted connecting bars (b) in a clockwise direction, fig. 27.
Completing assembly
To open door
Gently push the button on the handle backwards, simultaneously lift the gate and swing to the side, fig. 28.
To shut door
Swing the door back, lift, position and push down. The door latches automatically, fig. 29.
Make sure that the door is correctly latched in place and locked!
Note Regularly check the safety gate for secure mounting, stability and locking function. If necessary, amend the
positions according to the instructions listed in the user manual.
Please keep the sales receipt, operating manual and article number in a safe place.
All claims based on warranty or guarantee are to be directed solely towards the retailer.
- 12 -