Installation Instructions - Reer 46760 Manual De Instrucciones

Assembly
Preparation
Determine the width, in which the gate should be installed.
Determine the positions of the individual elements:
• the individual elements can be assembled in any sequence
• any element can be secured to the wall
• the sequence can be easily changed at any time without problems
• the gate can be mounted without problem in front of and in an opening
Be aware in doing so that your child may be able to reach through the gate bars!
CAUTION! Please keep the gate at least 80cm away from heat source!
Step 1
Put together door element (a) + extension (l) or (n), fig. 1 to fig. 4.
Connect elements The joints grip together like gears, fig. 8 and 9.
Insert connecting bar (b), upper metal cap though the connected hinges, gently screw in a clockwise direction,
fig. 5, 6 and 7.
Set angle Hinge connections of the individual elements allow 9 angle positions.
Gently lift bar section with the above lying hinge part. Choose the desired angle setting, lock the upper hinge part
into the lower, fig. 8 and 9.
Turn the connecting bar clockwise until both bar sections are securely connected to each other and can not move
any more, fig. 10.
Warning! The rails can only be tightened using the accompanying Allen key once the safety gate is completely assem-
bled!
other elements To add additional bar elements, repeat step 1.
Step 2
Wall mount
left side / The locking side of the door element is labelled as left side for easier understanding. The bars can also be const-
locking side ructed the other way round.
upper wall bracket Attach hinge cap (g) to the upper left hinge from below, fig. 11.
Slide the wall hinge (c) on the hinge so that it surrounds the hinge above and below, fig. 12.
Attach the lower hinge cap with the screw (f) to the other hinge from below, fig. 13.
Insert connecting bar (b), upper metal cap through the connected hinges, fig. 14 to 16, tighten in a clockwise
direction, fig. 14
CAUTION! The gate must assembled at least 40cm from the first step in staircases. If the distance is
too small the child can use this as a climbing aid.
CAUTION! Pay attention to keep the gate a sufficient distance away from sources of danger!
CAUTION: the external bar elements must be securely connected to the wall in order to ensure
that the safety gate is safe.
CAUTION: when constructing in a straight line without angle, the lower wall brackets must also
be mounted in order to guarantee stability!
When constructing with angles the upper wall brackets are sufficient.
- 11 -