Operation - Royal Sovereign RTP-1 Manual Del Usuario

OPeRaTIOn

Indicators
When the power switch is turned on, the Red Power Indicator will light.
When printer is ready to print, the green Status Indicator will light. If the Status indicator is not lit, the printer is offline.
The green status indicator will blink if the paper cover is open, if the printer is out of paper, or if the paper roll is not inserted properly.
Buttons
There are two buttons, Select (SEL) and Line Feed (LF) on the front panel of the printer.
Printing modes
The printer will automatically set to online mode when the power switch is turned on.
To switch to offline mode, press the SEL button until the green Status indicator turns off.
To switch to online mode, press the SEL button until the green Status indicator turns on.
If you press the SEL button during printing the printer will pause after finishing the current line. Press the SEL button again to continue
printing.
Paper Feeding
To feed paper first turn the printer offline by pressing the SEL button. Then press the LF button to feed the paper forward. Press the
LF button again to stop paper feeding. When paper feeding is completed, press the SEL button to turn the printer back online to print.
Installing Paper Rolls
To install a new roll of paper, first open the paper cover, then insert the roll
of paper so that a small amount of paper sticks out through the paper exit
slot. Close the paper cover. Feed paper forward to confirm the paper roll is
inserted properly.
Connection to Coin Sorter
Use the included printer cable to connect the Serial Connector on the back
of the printer to the Printer Port on the back of the Royal Sovereign FS-44P
Coin Sorter.
6