Tolerances:
All electrical and flux values are typical
values at 25ºC ambient.
Flux
+/- 7%
LED
-
Vf LED
+/- 5%
I-driver
+/- 12%
Temperature protection:
Both LED and Driver have a temperature protection.
When for any reason the temperature of LED is too high the
system first dims back to 50%, if it is still too hot it will switch
W
off. If the driver is too warm it switches off. Power will return
automaticaly when the temperature has dropped again.
-
+7% / -12%
T
max. of PCB:
c
+/- 5%
+12% / -17%
T
max. = 85ºC
c
Measurement in LED D7.
9
